<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: System Requirements

There are different aspects that you need to consider regarding the system requirements for PRTG. Meet these requirements to avoid issues while you monitor your network.

In this section:

Basic System Requirements

PRTG consists of two main system parts: PRTG core server and probes.

i_podIf you want to use PRTG Hosted Monitor, you need to install at least one remote probe on a system that meets the basic system requirements for remote probes.

Requirements for the PRTG Core Server

i_square_cyanFor more information, see the hardware and network size requirements for the PRTG core server.

For installations of the PRTG core server, you need to meet the following requirements.

Category

Requirements

Hardware

We recommend that you use x64 server hardware or a properly configured virtual environment.

Operating system

We recommend that you use Microsoft Windows Server 2022, Microsoft Windows Server 2019, or Microsoft Windows Server 2016.

Microsoft .NET Framework

It is required that .NET 4.7.2 or later of the Microsoft .NET Framework is installed on the PRTG core server system or the remote probe system. For new installations of the PRTG core server or remote probes, we recommend .NET Framework 4.8.

i_square_cyanFor more information, see the Knowledge Base: Which .NET version does PRTG require?

Web browser

The following browsers are officially supported by the PRTG web interface:

  • Google Chrome 75
  • Mozilla Firefox 67
  • Microsoft Edge 79
  • Safari 11 or iOS (Safari) 11

i_round_blueFor security and performance reasons, we strongly recommend that you always use the latest version of Google Chrome to access the PRTG web interface.

i_podPRTG Hosted Monitor does not require any hardware for the PRTG core server, but it needs at least one remote probe installation to monitor your local network.

Requirements for Remote Probes

i_square_cyanFor more information, see the hardware and network size requirements for remote probes.

For installations of remote probes, you need to meet the following requirements:

Category

Requirement

Hardware

We recommend that you use compatible x86 hardware or a properly configured virtual environment.

Operating system

We recommend that you use Microsoft Windows Server 2022, Microsoft Windows Server 2019, Microsoft Windows Server 2016, or Microsoft Windows 10.

Microsoft .NET Framework

It is required that .NET 4.7.2 or later of the Microsoft .NET Framework is installed on the PRTG core server system or the remote probe system. For new installations of the PRTG core server or remote probes, we recommend .NET Framework 4.8.

i_square_cyanFor more information, see the Knowledge Base: Which .NET version does PRTG require?

Stable network connection

Remote probes require a stable network connection between the PRTG core server and the remote probe.

i_podRemote probes that connect to a PRTG Hosted Monitor instance need a reliable internet connection. Unstable connections, for example via 3G, might work but you might lose monitoring data if the connection is unreliable.

General Performance Impact Considerations

Category

Performance Impact Considerations

Hardware resources

For a PRTG core server to work properly, it is crucial to have a certain amount of hardware resources available. If the server runs out of resources, PRTG sends warning and emergency messages to the primary email address of the PRTG System Administrator user.

i_round_blueYou receive warning messages if the available disk space falls below 1 GB or if the available memory falls below 500 MB, and emergency messages if the available disk space or memory fall below 50 MB. In this case, react immediately and free up system resources.

Sensors

Ping and SNMP sensors create much less load than complex sensors like flow sensors, VMware sensors, Sensor Factory sensors, WMI sensors. or Syslog Receiver or SNMP Trap Receiver sensors, for example.

i_round_blueThere are also limitations for some sensors that do not depend on hardware resources, for example, WMI and SNMP v3 sensors. You can overcome these limitations if you distribute the sensors between remote probes.

i_round_blueFor clusters, we recommend that you stay below 2,500 sensors per cluster.

Channels

We recommend that you use sensors with less than 50 channels. Note that sensors with more than 50 channels are not officially supported. PRTG will try to display all channels but it will limit usability and have a high impact on system performance.

Scanning interval

For a single PRTG core server setup without a cluster, we recommend that you mainly use 1-minute scanning intervals for up to 2,000 sensors and 5-minute intervals if you have more sensors.

i_round_blueTo give you an impression: To monitor 5,000 sensors with a 1-minute scanning interval, PRTG takes 7.2 million measurements and evaluates, notifies, and stores them. This adds 700 MB of additional data to the database every single day.

CPU-intensive features

Try to limit the use of the following features:

Network connection quality

The quality of your network also plays an important role. When you monitor via User Datagram Protocol (UDP), for example, a high packet loss rate can lead to frequent timeouts. Remote probes that connect via unstable (WAN) connections can lead to delays as well.

Running PRTG in Virtual Environments

You can run the PRTG core server and remote probes on virtualized platforms. However, PRTG consists of a lot of different components that all rely on the performance and the stability of the probe system where virtual environments add even more layers of complexity. This needs to be considered when you want to set up your PRTG installation in a way that you can achieve the same level of performance as on a physical server.

Most PRTG installations from 500 to 5,000 sensors do not need any specific optimization regarding your virtual infrastructure.

If you run larger installations of PRTG with more than 5,000 sensors, we strongly recommend that you follow the instructions in our Best Practice Guide: Running large installations of PRTG in a virtual environment.

i_round_redParticularly for virtual systems, make sure that you have a unique Windows security identifier per system.

Running PRTG in a Cluster

We recommend a single failover cluster for fail-safe monitoring. This consists of two PRTG core servers that each work as a cluster node.

In a cluster, the monitoring load doubles with each cluster node, so the performance of each additional cluster node is halved. Therefore, in a single failover cluster, divide our recommended numbers from earlier in the section in half.

i_podThis feature is not available in PRTG Hosted Monitor.

Large PRTG Installations

The maximum number of sensors you can monitor with one PRTG Network Monitor installation mainly depends on the monitoring technology and the scanning intervals you use. In general, we recommend that you use a dedicated physical machine to run both the PRTG core server and remote probes. Running large installations of PRTG in a virtual environment is possible if you follow some specific rules and guidelines to achieve the required level of performance.

i_square_cyanFor more information, see section Detailed System Requirements.

i_square_cyanFor more information, see the Knowledge Base: How can I speed up PRTG—especially for large installations?

i_podPRTG Hosted Monitor is restricted to a maximum of 10,000 sensors. More sensors are not possible.

Detailed System Requirements

Supported Operating Systems for the PRTG Core Server and Remote Probes

Category

Requirements

Supported operating systems

The 32-bit and 64-bit versions of the following operating systems are officially supported for the PRTG core server service and PRTG probe service:

  • Microsoft Windows Server 2022*
  • Microsoft Windows Server 2019*
  • Microsoft Windows Server 2016*
  • Microsoft Windows 11
  • Microsoft Windows 10

* Windows servers in Core mode or Minimal Server Interface are not officially supported.

Operating system version

The version (32-bit or 64-bit) of the PRTG core server depends on the version of your operating system.

Microsoft .NET Framework

It is required that .NET 4.7.2 or later of the Microsoft .NET Framework is installed on the PRTG core server system or the remote probe system. For new installations of the PRTG core server or remote probes, we recommend .NET Framework 4.8.

i_square_cyanFor more information, see the Knowledge Base: Which .NET version does PRTG require?

i_round_blueThe .NET framework is imperative if you want to monitor VMware and XenServer virtual environments. Many other sensors also need an installed Microsoft .NET Framework.

Disabled FIPS mode

Make sure that the Federal Information Processing Standards (FIPS) mode (Windows security option "System Cryptography: Use FIPS-compliant algorithms for encryption, hashing, and signing.") is disabled on Windows systems that run the PRTG core server service or PRTG probe service. FIPS-compliant encryption can cause issues with sensors that use the .NET framework.

i_square_cyanFor more information, see the Knowledge Base: What security features does PRTG include?

i_podPRTG Hosted Monitor is restricted to a maximum of 10,000 sensors. More sensors are not possible.

Hardware and Network Size Requirements for the PRTG Core Server

Hardware requirements for the PRTG core server service mainly depend on the sensors and scanning intervals that you use. Your network size can also influence the performance of your monitoring.

Sensors per PRTG core server

CPU cores

RAM

Disk space

Concurrently active administrator sessions

Number of remote probes

Up to 500

4

4 GB

100 GB

< 30

< 30

Up to 1,000

6

6 GB

500 GB

< 30

< 30

Up to 2,500

8

8 GB

750 GB

< 20

< 60

Up to 5,000

8

12 GB

1,000 GB

< 20

< 60

Up to 10,000

10 - 12

16 GB

1,500 GB

< 15

< 80

> 10,000

We recommend that you set up additional PRTG core servers. For more information on scaling, you can also contact the Paessler Presales team.

Hardware and Network Size Requirements for Remote Probes

Hardware requirements for the PRTG probe service mainly depend on the sensors and scanning intervals that you use. Your network size can also influence performance of your monitoring.

Sensors per remote probe

CPU cores

RAM

Disk space

Up to 200

2

2 GB

40 GB

200 - 2,000

4

4 GB

40 GB

2,000 - 5,000

6

6 GB

40 GB

> 5,000

We recommend that you set up additional remote probes. For more information on scaling, you can also contact the Paessler Presales team.

i_round_blueA remote probe system does not have any special disk requirements (< 1 GB). In general, we recommend at least 40 GB.

Performance Impact Considerations Based on Sensor Types

You can find the performance impact of a specific sensor on the Overview tab of the sensor or in the Add Sensor dialog.

i_square_cyanFor an overview list of all sensors, including their performance impact, see section List of Available Sensor Types.

In general, consider the following rules for the different sensor types:

Sensor Type

Performance Impact Considerations

SNMP v1 and v2, Ping, Port, and HTTP

We recommend that you use these sensor types for scenarios with thousands of sensors.

SNMP v3

SNMP v3 has performance limitations because of the use of encryption. Furthermore, keep in mind that SNMP v3, unlike SNMP v1 and v2c, does not scale with more CPU power. Because of this limitation, PRTG can only handle a limited number of requests per second so that you can use only a limited number of sensors using SNMP v3.

WMI

Try to keep the number of WMI sensors per probe below 120 sensors (with a 60-second scanning interval), or below 600 sensors (with a 300-second scanning interval).

Flow

The maximum number of flow sensors depends on the traffic pattern, the number of flow packets per second that the probe receives, as well as the performance of the probe system.

Packet Sniffer

This sensor type creates the highest CPU load on the probe system. We only recommend this technology for monitoring low traffic connections (< 50 Mbit/s steady stream). If the traffic often exceeds 10 Mbit/s, use a dedicated remote probe.

VMware monitoring

Monitoring VMware is limited to about 30 sensors at a 60-second scanning interval, or 100 sensors at a 5-minute scanning interval. On probes that run on at least Windows Server 2016, you can use more VMware sensors. These limitations come from the VMware platform.

i_square_cyanFor more information, see the Knowledge Base: How can I increase the connection limit on VMware systems? PE121

i_round_blueYou can overcome these limitations if you distribute the sensors between remote probes.

Supported Web Browsers

i_round_blueMicrosoft Internet Explorer 11, older versions of Microsoft Edge 79, as well as other browsers that are not officially supported, have issues with some functionalities of the PRTG web interface. However, you can access the PRTG web interface with any browser.

i_round_blueDeprecated Internet Explorer versions as well as some mobile browsers might not be able to display all features of the PRTG web interface.

Category

Requirements

Mozilla Firefox

i_round_redMozilla Firefox is potentially vulnerable to cross-site scripting (XSS) attacks. These XSS exploits are possible if you click, for example, phishing links in emails that contain malicious code, and you are logged in to PRTG with Mozilla Firefox.

i_square_cyanFor more information, see the Knowledge Base: How secure is it to access the PRTG web interface with Firefox?

Plugins

Plugins can also have an effect when you view the PRTG web interface. Make sure that you add exceptions for PRTG in the plugins' settings, particularly if you use ad blockers.

i_square_cyanFor more information, see the Knowledge Base: The logs page in the PRTG web interface does not load. What can I do?

Further System Requirements

Screen Resolution

A screen resolution of at least 1024x768 pixels is sufficient for most functions of PRTG. However, we recommend a screen resolution of 1200x800 pixels or higher.

Requirements for Monitored Devices

Category

Requirement

SNMP monitoring

The target devices must support SNMP v1, v2c, or v3. An SNMP-compatible software must be installed on the device. You must enable SNMP on the device and you must grant the PRTG core server system access to the SNMP interface.

i_square_cyanFor more information, see section Monitoring via SNMP.

Windows/WMI monitoring

To monitor via WMI, you need a Windows network. Use only the officially supported operating systems when you monitor via WMI.

i_square_cyanFor more information, see section Monitoring via WMI.

Flow monitoring

The target devices must be able to send NetFlow (NetFlow v5, NetFlow v9, or IPFIX) data packets or sFlow v5 packets to the probe system.

i_square_cyanFor more information, see section Monitoring Bandwidth via Flows.

Packet sniffer monitoring

PRTG can only analyze data packets that pass the network card of the local machine. Switches with monitoring ports are necessary for network-wide monitoring in switched networks.

i_square_cyanFor more information, see section Monitoring Bandwidth via Packet Sniffing.

Other sensor types

You can find specific sensor and device requirements (for example, modules, components, device configurations) in the corresponding sensor section and in the Add Sensor dialog.

Requirements for Smartphones and Tablets

You can optionally use the PRTG apps for iOS and Android.

i_square_cyanFor more information and system requirements, see section PRTG Apps for Mobile Network Monitoring.

More

i_square_blueKNOWLEDGE BASE

Which .NET version does PRTG require?

What security features does PRTG include?

How can I increase the connection limit on VMware systems? PE121

How secure is it to access the PRTG web interface with Firefox?

The logs page in the PRTG web interface does not load. What can I do?

How can I speed up PRTG—especially for large installations?

How do I run PRTG under a different Windows user account than the local system account?

What do I have to consider when I want to do a regular cleanup of my PRTG environment?

 

i_square_bluePAESSLER WEBSITE

System requirements for PRTG Network Monitor